Designed for Fleet Operators, this kit comprises everything you need for a commercial vehicle installation
The RoadHawk DC-2 forward facing camera is a lower cost alternative to the Roadhawk HD. The camera offers up to 1080p resolution (scalable to 720p or 480p for longer record times), low light sensor, GPS receiver, G-force sensor, SDXC memory compatibility and image stabilisation, this camera offers very similar performance to the more expensive RoadHawk HD.
The camera works on a loop recording system, overwriting the oldest files as it records. If it detects an impact, the camera creates an ‘event’ file. Event files are not overwritten unless they exceed 40% of the capacity of the memory card, at which point the oldest file will be overwritten first.
2) Hardwire Kit
The hard wiring kit for the RoadHawk DC-2 in car camera system has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera. Inside the filter box are components which will cut the power to the camera should the vehicle's voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanent 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.
3) Locking Box
Prevents any user from removing the SD card or the power cable from the camera without using the supplied key.
4) Dual Remote Alarm Cable
The remote alarm dual cable plugs in to the back of the RoadHawk DC-2 camera. This cable has a remote push button for manually triggering EVENT files.
It also has an alarm output which can be connected to a GPS tracking device, which can then notify your office in real time if your vehicle is involved in an Event.
5) 64GB SD Card
A high capacity Class 10 SD Card with enough room for 9 to 18 hours Video footage on a loop, plus secure storage for 180 to 375 Event Files depending on camera resolution settings
Options include: 128GB SD Card, GPS antenna and suction mount.
Ruby Dual Camera Dashcam Kit
The Ruby Dashcam is ideal for passenger transport vehicles such as Uber or Courtesy buses, where having a forward view of the road and a view inside the vehicle is important.
The Ruby Dashcam records loop video that can be used as evidence in the case of a patron being disorderly in the vehicle, will mitigate vexatious claims for people falling over getting on and off the bus and can support investigations into on-road driving incidents.
Furthermore the camera is lockable and tamperproof, so the driver cannot interfere with the camera settings or access the video record without a key. This means that the camera is going to be operational when you need it, you can make sure your drivers are complying with procedures and you control whether the video gets uploaded to the internet.
***PRICES INCLUDE GST***
RoadHawk E10 Multi Camera DVR System
The E10 system is the first multi camera black box recorder from RoadHawk designed for the commercial market.
One of your vehicles been involved in an accident? Not your driver at fault? Did the driver still get some blame? This is increasingly more common when the accident involves a vehicle more vulnerable than your own, which when driving a HGV they often are. The next level on from a single camera RoadHawk system is the E10 multi camera system. Offering all the benefits of a forward facing in vehicle black box system with the additional configurable features of ‘side swipe’ protection, rear view, load monitoring, occupant monitoring and up to 360 degree vision.
PLEASE NOTE: The price shown above is for the digital video recorder only. You will need to add cameras to this to make a fully working system.
We can provide a bespoke system for you from 1 to 4 cameras. Please call 0422 488 975 for more details.
RoadHawk Locking Box
The Locking Box solution for the RoadHawk HD and DC-2 dash camera prevents any user from removing the SD card or the power cable from the camera without using the supplied key.
The camera may still be removed from the camera mount with the locking box in place.
This solution was created for TFL approval of RoadHawk Dash Cameras.
The advantage with our locking box is that the camera can be removed from the vehicle within seconds once the box has been unlocked from the camera.
PLEASE NOTE: This locking box is only suitable for the RoadHawk HD and DC-2 camera.
RoadHawk HD Hard Wiring Kit
This is the hard wiring kit for the RoadHawk HD in car camera system.
It has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera.
Inside the filter box are components which will cut the power to the camera should the vehicle's voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanent 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.
Input: 12 - 32v
This kit has two wires.
Black = Negative (earth)
Red = Postive (12v)